Use the calculator below to get a rough range for your windows. Pick the type of work, choose the job size closest to yours, and you will see a guide figure based on typical Kent prices. It is a starting point for a budget, not a quotation, and a surveyor who has measured your openings will give a more reliable number.
How to read the three job sizes
Small is a single-fault or single-window job, such as one misted unit, one new casement or one tilt and turn. Typical is the front of a house, three to five windows, or an average repair-and-replace job. Large is a whole house, a premium specification, or a job with extra structural work such as a bay with a new lintel or a full timber sash set.
What is behind the ranges
The figures come from the typical ranges for each service in Kent. Double glazing replacement runs from about £150 to £10,500, uPVC casement windows from £300 to £6,800, bay windows from £1,700 to £6,500, cottage style windows from £400 to £8,500, tilt and turn windows from £450 to £7,500, and sash windows from £950 to £16,500.
What the calculator cannot know
- The condition of your frames, reveals and lintels
- Whether your house is listed or in a conservation area, which can limit your choice of material
- How many windows are bays, sashes or loft windows
- Access, parking and scaffolding for upper floors
- Extras such as new cills, window boards, plaster repairs and disposal
If a written quote is far above or below the range shown, ask the installer to explain the difference line by line. There may be a good reason, such as structural work or timber frames, but it is worth hearing before you pay a deposit.
For more detail on a single window type, see the casement window price guide, or the double glazing replacement price guide if you are only dealing with failed sealed units. Whichever route you take, compare written quotes line by line, because two prices for the same job can include very different things.
Frequently asked questions
How accurate is the window cost calculator?
It gives a guide range based on typical Kent prices. It cannot account for the condition of your frames, listed building rules, access or extras, so treat it as a budget starting point rather than a quote.
Does the calculator include VAT and fitting?
The ranges are for supplied and fitted work. Always check with each installer whether their written quote includes VAT, removal of the old windows and making good.
Why is the sash window range so wide?
It covers everything from one uPVC vertical slider to a whole house of double glazed timber box sashes, which is a very different job. Material and the number of windows account for most of the gap.
Ready to talk to a double glazing replacement specialist?
Get Free Quotes →
