Cost guide

uPVC Casement Windows Cost in Kent: Price Guide

uPVC casement windows in Kent typically cost £300–£650 for one window and up to £6,800 for a whole house, with the number of openings doing most of the work.

⏱ 5 min readUpdated 31 October 2026Covers: uPVC Casement Windows
Illustration of a weatherboarded gable wall with three white casement windows, one standing open, an oast house behind and a pound coin tag beside three rising price bars

A casement is the ordinary hinged window, and it is what most Kent homeowners are pricing when they ask for new windows. For uPVC casement windows the usual range runs from about £300 for one standard window to £6,800 for a whole house. Most of that gap comes from how many openings you have, not from the frame itself.

Typical casement window prices

Typical uPVC casement window costs in Kent, supplied and fitted

Job sizeWhat it usually coversTypical cost
SmallOne standard window, white£300–£650
TypicalThree to five windows, such as the front of a semi£1,000–£2,800
LargeWhole house, or coloured and flush-sash frames£2,800–£6,800

Unit prices fall as the order grows. One window carries the installer's whole visit, while ten share it, which is why a house of twelve windows rarely costs twelve times the single-window figure. If you only need a couple done, ask whether the installer will price the rest of the house at the same visit so you can see the difference.

What pushes a quote up or down

  • Sash style. A chamfered sash is the standard. Sculptured profiles cost a little more, and flush sashes, which sit level with the frame and copy painted timber, cost more again.
  • Colour. White is cheapest. Grey, black, cream and woodgrain foils carry a premium, and more again if the colour runs through to the inside face.
  • Size and glass. Large openings need heavier glass and sometimes a reinforced frame. Toughened glass is required in some positions, such as low panes and panes beside doors.
  • Opening arrangement. Fixed lights are cheaper than openers, and a top-hung vent over a fixed pane often costs less than a full side-hung sash.
  • Access. A first-floor window above a conservatory roof, or at the end of a narrow side passage, takes longer to fit.
  • Making good. New cills, plaster repairs and external sealing are often quoted separately.

Kent details that affect the choice

Seafront and clifftop homes in Thanet, Dover and Folkestone take a lot of salt and wind, and the first thing to give is usually the hardware rather than the frame. Ask what the hinges and friction stays are made of and whether the finish is rated for coastal use. Inland, particularly on the clay of the Weald and in the Medway valley, the common complaint is condensation through damp winters, so ask whether trickle vents are included and where they will sit.

A great deal of Kent casement work is replacing first-generation uPVC from the 1980s and 1990s, particularly on the estates around Medway, Dartford, Sittingbourne and Ashford. Those frames often have failed seals or sagging hinges, and the thinner profiles are hard to repair. If only the glass has gone, the cheaper route is a new sealed unit, which our double glazing replacement page explains. In conservation areas or on a listed building, check with the council before ordering, because a standard casement may not be accepted.

Compare like with like

Two quotes can both say white uPVC casement and be different products. Ask each installer for the frame system by name, the glass specification and whether VAT is included, so the figures line up.

Checks before you sign

  • Whether the price is per window or for the whole job
  • Who removes and disposes of the old frames
  • Certification through a competent person scheme such as FENSA, or building control sign-off
  • Guarantee length on the frame, the glass and the hardware, and whether it passes to a buyer if you sell
  • Whether any window needs egress sizing, for example a bedroom above the ground floor

If you are weighing styles, a bay window costs more but changes a room, and the cost calculator lets you run your own numbers. If you are not sure the windows need replacing at all, start with our checklist of warning signs.

Frequently asked questions

How much do uPVC casement windows cost in Kent?

As a guide, one white window costs about £300–£650 fitted, three to five windows around £1,000–£2,800, and a whole house up to roughly £6,800.

Are flush sash casements worth the extra?

They look closer to painted timber, which suits older terraces and cottages. They cost more than a chamfered sash, so they tend to be worth it where appearance matters and less so on a modern estate.

Is it cheaper to replace all the windows at once?

Usually, per window. Fitting costs are shared across the order, so a whole-house job tends to cost less per opening than doing windows one at a time over several years.

Do I need planning permission for new casement windows?

Like-for-like replacement is usually allowed without it for ordinary houses, but conservation areas, listed buildings and flats can be different. Check with the local council before you order.

Ready to talk to an uPVC casement windows specialist?

Get Free Quotes →