Cost guide

Bay Window Replacement Cost in Kent: Price Guide

Replacing a bay window in Kent typically costs £1,700–£3,000 for a small bay and up to £6,500 for a large bow or two-storey bay, depending on what the bay supports.

⏱ 6 min readUpdated 31 October 2026Covers: Bay Windows
Illustration of a tile-hung house front with a three-sided canted bay window and a small roof, beside a bay outline, a pound coin tag and rising price bars

A bay is the most expensive window job on most houses, and the glass is rarely the reason. What you are paying for is the structure around it. The brick base, the little roof or the bedroom above, and whatever carries that weight all decide the price. For bay windows in Kent, expect roughly £1,700 for a small bay and up to £6,500 for a large bow or a two-storey bay.

Typical bay window prices

Typical bay window replacement costs in Kent, supplied and fitted

Job sizeWhat it usually coversTypical cost
SmallThree-section canted or square bay under its own small roof£1,700–£3,000
TypicalLarger front bay with bay poles, or a five-section bow£3,000–£4,500
LargeTwo-storey bay, timber bay, or a bay needing a new lintel£4,500–£6,500

These are guide figures rather than quotations, and the top band can be exceeded where there is structural repair. A flat window of the same width costs well under half as much, because a bay needs corner posts, extra jointing and support.

What decides the price

  • What the bay carries. A bay holding only its own lead or tiled roof is a smaller job than one with a bedroom or a second bay sitting on top.
  • Support method. Bay poles hidden in the corners, load-bearing couplers and a new steel or concrete lintel are three different costs. uPVC cannot carry weight on its own.
  • Shape. A bow made from several narrow frames at shallow angles costs more than a three-section canted bay of the same width.
  • Material and colour. White uPVC is cheapest. Timber, coloured foils and heritage detailing push the price up.
  • The bay roof. Replacing lead, felt or tiles over the bay is often quoted separately, and scaffolding is needed for upper bays.
  • Making good. Brickwork, render and plaster repairs after the old bay comes out.

Bays across Kent

Kent has bays from almost every period. Victorian terraces in Gillingham, Chatham and Tunbridge Wells have brick canted bays, Edwardian villas in Canterbury and Folkestone often have two-storey versions, and the semis of the 1930s in Dartford, Maidstone and along the Thanet coast tend to have square or bow bays. Seaside bays face straight into the wind, so ask about hardware that is rated for salt air.

Many older bays were quietly held up by their original timber frames. When those are swapped for uPVC, something else has to take the load, and a good installer will explain exactly what before work begins. If they cannot, treat that as a warning. Cracks at the corners of an existing bay, or a gap opening between the bay and the main wall, are worth showing a surveyor before you ask for prices.

Ask about the load

A quote that does not say how the weight above the bay will be carried, during the work and afterwards, is incomplete. Ask whether poles, reinforced couplers or a new lintel are included, and whether an engineer's calculation is part of the price.

Planning, regulations and certification

Replacing a bay with one of the same size and similar appearance is normally permitted development on a house. Extending it outward, changing its shape or working in a conservation area or on a listed building can need permission, and Kent has many Victorian bays in conservation areas that officers care about. Structural work may need building control rather than a competent person scheme certificate, so ask which route applies. The Planning Portal's guidance on windows and building regulations is a useful overview.

If you would rather start with a simpler job, uPVC casement windows cost much less per window, and the cost calculator will show how a bay changes a whole-house total. Buying a house with a tired bay is covered in our guide to buying with old windows.

Frequently asked questions

How much does a new bay window cost in Kent?

As a guide, a small three-section bay costs about £1,700–£3,000 fitted, a typical front bay £3,000–£4,500, and a large bow or two-storey bay up to roughly £6,500.

Do uPVC bay windows need bay poles?

Where the bay carries a roof or a storey above and there is no adequate lintel, yes. uPVC is not designed to carry structural loads, so poles, load-bearing couplers or a new lintel take the weight.

How long does a bay window replacement take?

Most single-storey bays are removed and refitted within a day. Two-storey bays, or bays needing a new lintel, can take two days or more.

Can I change a bow window into a canted bay?

Often, provided the brick base and the structure above suit the new shape. The installer needs to check the angles and the support, and planning rules may apply in a conservation area.

Ready to talk to a bay windows specialist?

Get Free Quotes →