Guide

Buying a Kent House with Old Windows: What to Check Before You Complete

Buying a Kent house with old windows? Check the glass, the frames, certificates and listed status first, and budget from £150 for sealed units up to £16,500 for a whole house of sashes.

⏱ 6 min readUpdated 31 October 2026Covers: Double Glazing Replacement, uPVC Casement Windows, Sash Windows
Illustration of a tile-hung house with two casement windows and a blue front door, a for-sale board beside it and a stack of documents with a stamp

Windows are easy to forget when you are buying a house. They do not show up on the viewing checklist the way a boiler or a roof does, and yet replacing them can easily run to several thousand pounds. If the survey, the seller's paperwork and your own look at each window point to tired glazing, you can use that when you negotiate. Here is what to check, and what it is likely to cost.

What to check on the viewing

  • Fog or droplets between the panes, which means a failed sealed unit. This is usually a smaller job than a new window, and our double glazing replacement page explains it.
  • Handles and hinges. Open and close every window and check it locks properly.
  • Frame condition. Yellowed, bowed or cracked uPVC, and soft or flaking timber, are worth noting for each room.
  • Draughts and condensation. Run your hand round the closed sash. Black mould on the reveals is a warning.
  • Bedroom and loft windows. Check they open wide enough to act as an escape route.
  • Style. Note whether the house has bays, sashes or cottage style windows, because those cost more to replace than plain casements.

Paperwork to ask for

Replacement windows fitted since 2002 should have a certificate from a competent person scheme such as FENSA or a building control completion certificate. Your solicitor should ask the seller for it, and for any guarantees. If the windows were replaced without one, the council can sometimes require retrospective approval, and an indemnity policy may be suggested. Guarantees on sealed units, frames and hardware may or may not pass to you, so ask.

If the house is listed or in a conservation area, ask whether the existing windows were replaced with consent. Unauthorised replacement of windows on a listed building can create a legal problem that stays with the property. Check with the council if there is any doubt, and ask your solicitor to raise it.

What replacement might cost

Guide costs for replacing windows in Kent

SituationWhat it usually involvesTypical cost
Misted units, frames soundA few new sealed units£150–£600
Tired frames on a small houseThree to five new windows£1,000–£4,000
Whole-house uPVC replacementAll windows replaced£2,800–£10,500
Period house with sashesuPVC or timber sashes throughout£7,000–£16,500

These are guide figures, and the real number depends on how many windows there are and whether the house has bays or sashes. Our price guides for sash windows and double glazing replacement go into more detail.

Kent houses worth a second look

Victorian and Edwardian terraces in the Medway Towns, Canterbury and Tunbridge Wells may have lost their original sashes decades ago, and replacement casements fitted then may now be failing. Weald cottages may have timber windows with soft sills or rotten frames. Seafront flats and houses in Thanet, Folkestone and Dover take a lot of weather, so hardware and seals often need attention sooner. Estates from the 1980s and 1990s in Medway, Dartford and Ashford may all have first-generation double glazing that is now at the end of its life.

Use it in negotiation

If the surveyor notes failing windows, get a written quote before you make your offer. A real figure from an installer gives you much more to negotiate with than a general remark about window condition.

Once you have the keys, the warning signs checklist will help you decide which windows to tackle first, and the cost calculator gives a quick budget.

How to check the windows when buying a house

  1. Look at each window on the viewing

    Check for fog between the panes, damaged frames, rotten timber and mould on the reveals.

  2. Open and close every window

    Make sure each one locks, stays open and does not drag, and that bedroom windows open wide enough to escape through.

  3. Ask for certificates and guarantees

    Request FENSA or building control certificates and any guarantees for windows fitted since 2002.

  4. Check for listed or conservation status

    Find out whether the house is listed or in a conservation area and whether past window changes had consent.

  5. Get a written quote

    Have an installer quote for any windows that need replacing and use the figure when you negotiate.

Frequently asked questions

Do I need a FENSA certificate when buying a house?

Replacement windows fitted since 2002 should have a FENSA or similar competent person certificate, or building control sign-off. Your solicitor will normally ask the seller for it.

How much does it cost to replace all the windows in a house in Kent?

As a guide, a typical house costs about £2,800–£10,500 for uPVC, depending on size. A whole house of timber sashes can reach £16,500.

Can I get a discount on the price if the windows are old?

Sometimes. Survey findings and written quotes give you something concrete to raise, but the seller does not have to agree.

What if the seller replaced the windows without a certificate?

Tell your solicitor. They can ask the seller for retrospective evidence, and an indemnity policy may be suggested. The council can also advise on regularisation.

Ready to talk to a double glazing replacement specialist?

Get Free Quotes →