Guide

Misted, Draughty or Failed Double Glazing: Replace the Unit or the Window?

A misted sealed unit in a sound frame can cost £150–£500 to swap, while a worn-out frame usually means a new window. Here is how to tell which you have.

⏱ 5 min readUpdated 31 October 2026Covers: Double Glazing Replacement, uPVC Casement Windows, Tilt and Turn Windows
Illustration of two cards side by side: a cross-section of a sealed double glazed unit with droplets between the panes, and a misted window in its frame, joined by an arrow

A misted double glazed window is not always a dead window. If the frame is sound, the fix is often just a new sealed unit, which costs a fraction of a whole window. If the frame is warped, draughty or past it, a new unit is money spent on the wrong part. This guide explains how to tell which you have before you call anyone, and how to think about the choice.

What has actually failed

A sealed unit is two panes of glass separated by a spacer bar, with the gap sealed and usually filled with gas. When the seal breaks, damp air gets in and moisture condenses on the inside faces of the glass where you cannot wipe it. That is misting. It tells you about the unit, not the frame. Draughts, sticking and rattling usually point to the frame, the gaskets or the hinges instead.

Replace the unit when

  • The frame is square, solid and not discoloured, with no sagging or warping
  • The hinges and handles work properly and the seals are in good order
  • Only a few units are misted and the rest of the window is fine
  • The glass is a standard size and shape that can be re-made

Replace the window when

  • The frame has bowed or twisted, so the sash no longer sits flat
  • The uPVC is yellowed, chalky or cracked at the joints
  • Hinges have dropped and the opener scrapes or will not lock
  • Several units are misted and the windows are all of an age
  • You want better thermal or acoustic performance than the old frames can support

Unit swap or new window: guide costs in Kent

OptionTypical costBest when
One small or medium sealed unit£150–£500Frame sound, one or two units misted
Several units across the house£150–£600 for a few unitsFrames sound, many units misted
One new casement window£300–£650Frame worn out or hardware failing
Whole house of new windows£4,000–£10,500Most frames at end of life

Draughts: fix the leak first

A draught can come from a worn gasket, a hinge that has dropped or a gap between the frame and the wall. Run your hand around the closed sash on a windy day, and check the sealant outside. Often the cure is a new gasket or an adjustment, and neither needs a new window. If the gap is in the frame itself, the window may be failing in a way that no unit swap will cure.

Seafront and clifftop homes in Thanet, Dover and Folkestone see more wind-driven draughts, and the hardware tends to corrode faster. Ask about stainless or coastal-rated hinges and stays when you replace anything. On older Kent estates, particularly those built around Medway, Dartford and Ashford in the 1980s and 1990s, the frames themselves are now often the weak point.

Get both options priced

Ask the installer to quote for a unit swap and for a new window on the same opening. The difference tells you whether replacement is worth considering now or later.

If you want to check the whole house first, the warning signs checklist takes you through each room. For full prices, see our double glazing replacement cost guide. If you decide on a new window, uPVC casement windows and tilt and turn windows are the two most common choices.

How to decide between a new sealed unit and a new window

  1. Find out where the moisture is

    Moisture between the panes means the sealed unit has failed. Moisture on the room-facing side is condensation, not a failed seal.

  2. Check the frame

    Look for bowing, yellowing, cracks at the corners and hinges that have dropped.

  3. Test the opener and gaskets

    Open and close the window, check it locks, and feel for draughts along the gasket.

  4. Count the affected units

    A few failed units in sound frames suggest a unit swap. Many failed units in tired frames suggest replacement.

  5. Ask for both options priced

    Request a quote for new units and for a new window on the same opening, then compare.

Frequently asked questions

Can misted double glazing be fixed without replacing the unit?

Some firms offer to drill and treat misted units, but the seal has still failed, so results vary. A new sealed unit is the more reliable fix.

Is it cheaper to replace one sealed unit or the whole window?

A single unit swap is cheaper in the short term, typically £150–£500. It only makes sense if the frame is sound.

How long does it take to replace a sealed unit?

Usually a short visit once the unit has been made to size, but manufacture takes days or weeks, so there are normally two visits: one to measure and one to fit.

Will new glass help with draughts?

Not if the draught comes from the frame, gasket or hinge. Check where the draught is coming from before ordering a new unit.

Ready to talk to a double glazing replacement specialist?

Get Free Quotes →